Inch deep groove ball bearing RMS-7-2Z, Bore 0.875", Outside diameter 2.25", Width 0.6875"
RLS and RMS inch series deep groove ball bearing dimensions conform to British Standard BS 292 : Part 2 : 1982. These bearings can carry axial loads acting on both directions, in addition to radial loads, even at higher rotational speeds.
The major applications of RLS and RMS inch ball bearings are in Jute Industries, Textile Industries, Line shaft applications, Tanneries, Rice Mills and all machinery equipment following Imperial standards.
These bearing will be limited for the order quantity. Customer need to contact us before ordering them.
| d | 22.225 mm | Bore diameter |
| D | 57.15 mm | Outside diameter |
| B | 17.462 mm | Width |
| Cr | 18.6 kN | Basic dynamic load rating |
| C0r | 9.3 kN | Basic static load rating |
| 15000 r/min | Reference Speed | |
| 12000 r/min | Limiting speed |
| ≈m | 0.21 kg | Weight |
| None | Locating feature outer ring | |
| Bearing steel | Material of race | |
| Sheet steel | Cage | |
| Shield | Closures | |
| CN | Radial clearance | |
| P0 | Tolerance |
| SKF | SCHATZ | RHP |
| RMS-7-2Z | MS-9-FF | MJ- 7/8 -2Z |
